PARTOGEN - 2                      ISI Marked           HMP™

­­­­­

A sturdy well balanced cutting blowpipe

• HMP partogen 2 is designed to cut upto 300 mm. thick mild steel.

   

• Injector type cutters can be used with dissolved Acetylene Cylinders or Acetylene Generators.

   

• Can also be used with LPG with suitable Nozzle.

   

• Standard version is 450 mm / 90*. Also available in different lengths and head angles (180*). The other models can be made available against specific orders.

   

Special Features:-

• Body and head are of forged brass. Eliminate casting porosity and ensure total safety and gas economy.

   

• Gas flow geometry designed to prevent blow backs.

   

• Laminar gas flow for quality cutting and gas saving.

   

• Swaged Nozzles ensure parallel beam of heating flame; refracting of Nozzles possible enhancing Nozzle life without compromising on “cut” quality.

   

Look for seal of safety:-

• HMP embossed on forged body.

   

Conversion notifications :

• 1 psi = 6.895 kpa = 0.0703 kg/cm2 = 0.0703 Bar    

   

• 1 Lit./min = 0.4719 CFH (cu.ft.hr.): 1m3/hr. = 0.0283 CFH 

   

N. M. CUTTER                                                 HMP  ISI

­­­­­

New generation Nozzle Mixing Technology for new standards in Safety and Efficiency.

Light weight (1.44 kg) NM Cutters are easy to handle and can withstand rough usage for longer time. Not only piercing is made easier by NM Cutters, but it can also be used for gouging using suitable Nozzles.

Specifications:-

NM Type Nozzle                     :           Much safer, virtually no backfire due to mixing of gases in the 3 seat

Nozzle only. Making chances of backfire / flashback very remote.

Angle head                              :           Forged from brass rods much stronger and longer life.

Tubes for O2 & Fuel Gas       :           Seamless Stainless Steel.

Lever for Cutting Oxygen      :           Seamless stainless Lever, positioned for convenient handling by

operator. Provided with a latch facility to avoid operator fatigue.

Handle                                                :           Metallic instead of plastic –                                                                      longer life, much better  appearance                                                         and grip.

Knobs                                     :           Metallic – better grip, longer life.

Weight of Cutter                     :           Much lighter – lower fatigue to operator. Weight, just 1.44 kg.

(Without Nozzle).

Conversion notifications :

• 1 psi = 6.895 kpa = 0.0703 kg/cm2 = 0.0703 Bar    

   

• 1 Lit./min = 0.4719 CFH (cu.ft.hr.): 1m3/hr. = 0.0283 CFH 

   

BLOWFIRE                                                                   ISI Marked                     HMP™

­­­­­

Welding blowpipe for medium and heavy welding applications

An ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is

Supplied with tips suitable for welding mild steel in the range of 1.00 mm. to 12mm thickness.

The blowpipe is supplied complete with hose connections, spanner, operating data card and 9 nos. swaged tips

sizes: 2,3,6,13,20 & 30. Additional tips may be supplied on demand.

Specifications:-

Conversion notifications :

• 1 psi = 6.895 kpa = 0.0703 kg/cm2 = 0.0703 Bar    

   

• 1 Lit./min = 0.4719 CFH (cu.ft.hr.): 1m3/hr. = 0.0283 CFH 

   

HMP STAG, STAG-NM, HIND                                           

­­­­­

HMP-straight line and circle cutting machines.

Special Features:

• Easy to handle:

   

The Machines are light weight and they have a wrap round handle for easy portability and protection.

• Body:

   

Made of pressed steel with wrap/round handle and asbestos heat deflector.

• Versatile:

Using extendable tracks, these machines can produce straight cuts on any length, square or bevel edge. With the same precision these machines can cut circles and also shape with gradual curves, when hand-guided.

• Circle Cutting:

Can be done with the use of circle cutting attachments, supplied as optional extra. This can be easily attached to the machines by two screws.

• Cutter:

STAG and HIND:- Injector type, specially designed to prevent backfire.

STAG NM:- Nozzle Mixing type, Latest technology, much safer.

• Cutter adjustment:

Cab be Swivelled to cut levels up to 45* with Rack and Pinion.

• Fuel Gas:

Acetylene or LPG can be used by selecting the appropriate nozzles. Two nozzles for use with Acetylene for cutting MS from 6 mm to 100 mm thickness supplied along with the machine. Other types and sizes are available as optional extras.

• Motor:

Machines are fitted with 220 volts Fractional Horse Power. Geared reversible motors. Power is fed through a Forward-Reverse toggle Switch.

• Track:

1.8 meter long Aluminium Track can be supplied as optional extra. The STAG/STAG NM machines may be set to follow the edge of any straight piece of metal, 8x20 mm.

Optionals :      i)          Circle cutting attachments ii)      Extra nozzles for torches iii)       Aluminium tracks

Conversion notifications :

• 1 psi = 6.895 kpa = 0.0703 kg/cm2 = 0.0703 Bar    

   

• 1 Lit./min = 0.4719 CFH (cu.ft.hr.): 1m3/hr. = 0.0283 CFH